FIR FLYWHEEL PULLER M18 x 1.50 RH

FLYWHEEL PULLER EXTRACTOR 18mm x 1.50mm RightHand.

YAMAHA

MX CROSS YZ125/250,,

Used for removal of the flywheel or rotor if applicable.
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Tips on use.

- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.

- Use copper grease on the puller threads, for long life.

- Make sure the puller is fully screwed into the flywheel.

- After tightening use a hammer on the centre and tap to jolt free [not always need].

- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-096.DR [FACTORY IMAGE RACING] (Distributed )

Cross reference numbers.

BUZZETTI 5208, UP-12919

Tips on use.

- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.

- Use copper grease on the puller threads, for long life.

- Make sure the puller is fully screwed into the flywheel.

- After tightening use a hammer on the centre and tap to jolt free [not always need].

- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.